Assembled the bolt with the channel nut and the locking clip used to install and fix in the steel channel structure directly, the nut is tapped by metric or inch internal thread. The special sizes of the spring length and the nut are available.
Channel spring nut consists of a spring and a oblong nut. The nut has a threaded hole in the middle, which can be used to tap metric and inch inner threads, and is used to connect the accessories to the prop by bolt fastening. spring nuts can be roughly divided into three varieties: long spring, short spring and non spring. Various kinds and sizes of spring nuts are provided. Channel nuts and bolts is a very important parts. During installation, a series of hexagon head screws (hexagon bolts) are combined for fastening installation. Spring nuts with pre installed built-in bolts are also provided. These are called the stud nuts, which can be directly used for the installation and fixation of steel channel structures. They can make the assembly process very fast and efficient.
A special groove tooth pattern is designed in the parallel channel groove of the strut channel nut to clamp the return lip of the channel. The shear action of the teeth ensures the safety and firm locking between the pillar channel and the accessories. The nut is used with the spring support channel.
Long spring channel nut is very important to the channel support system. They are installed through the open side of the channel and then rotated 90 degrees, where their slots are close to the inner side of the raceway.
|Item Code||Thread Size (mm)||Width (mm)||Length (mm)||Thickness (mm)|
|Item Code||Thread Size (Inch)||Width (mm)||Length (mm)||Thickness (mm)|
**The Special sizes and styles are available.