Founded in 1998,Specializing in Expansion Anchor Bolts and Cable Installation Parts.
You are here: Home » Steel Expansion Anchors » Chemical Anchors » Chemical Anchor Bolt Internal Hex Head
Share to:

Chemical Anchor Bolt Internal Hex Head

Chemical Anchor With Internal Hex Head is made by the carbon steel and zinc plated. Chemical or resin anchor bolt is a common terms relating to steel stud or bolts with the anchorages which are bonded into a substrate in concrete and masonry,using a resin glass capsule adhesive system.

  • Metric & Inch Standard
  • OEM
  • 7318159001

     Chemical adhesive anchors or chemical resin anchor is a common product name term for steel studs or bolts with fixings that are bonded to substrates in concrete or masonry using a resin glass capsule adhesive system. It is suitable for the fixed application in medium and high load situations, and the adhesive force generated is stronger than that of the base material. 

adhesive chemical anchor bolt

    Because the system is based on chemical adhesion function, it will not impose any load stress on the base material, so it is very suitable for near edge fixation, reducing the center and group anchors, and used in concrete and solid walls and masonry with unknown quality or low compressive strength.

    Chemical masonry anchor studs are made of carbon steel and or stainless steel. The fixation is not affected by radial expansion force, and the precise drilling depth close to the edge can be adopted. It is a kind of concrete anchor fixing rod product.

chemical anchor resin

     Stainless steel chemical anchor bolts system can be made to the same size as steel chemical anchor bolts. There are external hexagon head, internal hexagon head and flat head, with installing tools. Special size and style can also be made according to the needs of customers.

M10 chemical anchor

Product features:

1. Quick and convenient installation.

2. Also be used in wet conditions or underwater.

3. No expansion property.

4. Except for the increase of chemical bonding curing time, there was no effect of pollutants.

5. And can cooperate with reinforcement construction.

Chemcial curing time:

In the dry substrate installation

Concrete  temp.℃ Curing Time
≥ 20 15 Min.
10 ~ 20 25 Min.
0 ~ 10 1.5 Hr.
-5 ~ 0 6 Hr.

In the wet substrate installation

Concrete  temp.℃ Curing Time
≥ 20 30 Min.
10 ~ 20 50 Min.
0 ~ 10 2.5 Hr.

 In the underwater  installation

Concrete  temp.℃ Curing Time
≥ 20 1.5 Hr.
10 ~ 20 3 Hr.
0 ~ 10 6 Hr.

Installation Instruction:

1. Use cemented carbide or core drill bit to pre drill the installation hole in the base.

2. Remove the debris in the hole with hole cleaning pump, compressed air or brush.

( If the hole is wet or soaked in water, it is recommended to clean the hole with a brush)

3. Insert the chemical glass capsule into the hole.

4. Insert the threaded stud to the required fixing depth.

5. Observe the specified curing time of adhesive.

6. After complete curing, use tools to tighten the nut to complete the fixation.

Chemical anchor stud

Item Code
 Stud  Size(mm/Inch)  Max.Thickness  Fastened  Hole   Size Hole Depth
CHEMA-08 M8 X 110
16 10 80
CHEMA-10
M10 X 130 22 12 90
CHEMA-12 M12 X 160 30 14 110
CHEMA-16 M16 X 190 38 18 125
CHEMA-20 M20 X 260 70 25 170
CHEMA-24 M24 X 300 65 28 210
CHEMA-30 M30 X 380 70 35 280
CHEMA-5/16 5/16 X 4-1/2 3/4 3/8 3-3/8
CHEMA-3/8 3/8 X 5 1 7/16 3-5/8
CHEMA-1/2 1/2 X 6-1/4 1-1/4 9/16 3-9/16
CHEMA-5/8 5/8 X 7-1/2 1-3/4 3/4 6
CHEMA-3/4 3/4 X 10-1/4 2-3/4 7/8 7-1/2
CHEMA-7/8 7/8 X 11-3/4 3-3/4 1 8-1/2
CHEMA-1 1 X 11-3/4 2-1/2 1-1/8 8-1/2
CHEMA-1-1/4 1-1/4 X 14-1/8 2 1-7/16 11-1/2

The special style and size are available.




Send Us Your Inquiry Now!

Contact Us
Add : Zhenxin West Road, ZheDong Economical
Developing Zone, YuYao, Ningbo, Zhejiang, China
Tel: 0086-574-66121970
Fax : 0086-574-22656709
Email : sales@fastener-fixing.com

Quick Links

Copyright 2019  YuYao JingCheng Hardware Manufacturing Co., Ltd. All Rights Reserved.