Cone Sleeve Anchor EyeBolt consisted of Eyebolt,washer,hex nut,plastic ring and sleeve tube assembled together. The washer is wide size, which gives a bigger allowance for place or structures to be fastened.
While performing the fixing of the anchor, the plastic ring gets deformed. which fills and blocks the hole of the place ofr structure to be fastened; this plastics absorbs material irregularities, and-in addition-it is a useful damp-proof place to inner mechanism of the anchor.
Any head available as your requirement.
The cone has some grooves(milled)in order to prevent the anchor from loose or spin movement after fixing into the hole and ready to expansion.
|Anchor Size (mm)||Dril Dia.||Hookbolt Size|
|M6 X φ8 X 45||8||M6 X 45|
|M6 X φ8 X 60||8||M6 X 60|
|M8 X φ10 X 65||10||M8 X 65|
|M8 X φ10 X 80||10||M8 X 80|
|M10 X φ12 X 70||12||M10 X 70|
|M10 X φ12 X 100||12||M10 X 100|
|M12 X φ16 X 80||16||M12 X 80|
|M12 X φ16 X 110||16||M12 X 100|
|M16 X φ20 X 120||20||M16 X 120|
|M20 X φ24 X 130||24||M20 X 130|
***The special size are availabel as customers'needings***