Heavy Duty Shield anchors are suitable for fixing the objects in the concrete, masonry, brick and hardstone place. In the case of concreate substrate of unknown strength preliminary tests should be carried out to check suitability and determine allowable loading strength.
They should not be used in the light weight blockwork site. The all steel parts are assemblied for maximum performance, The Hex bolt length should be suitable for for fixture thickness from 50 mm upto 150mm, ferrule marked with hole diameter to ensure correct installation. optimum taper nut geometry expansion in all substrates.
Also being supplied without a hex bolt for a specified fixings usage, beside shield bolt The usual sizestandard is from diameter M6-1/4" to M20-3/4" for the special size and the style are available according to sketch and sample.
* When fastening the hex bolt head by tool,the square nut is pulled into the anchor body to expand it*
|Item Code||Anchor Size (mm/Inch)||Anchor Length (mm)||Drill Dia. (mm)||normal hex bolt size. (mm)|
|4PA06||M6 (1/4 )||40||12||50|
The Anchor Body sizes are as before. The Flat Washer can be supplied Din 125 Or Din 9021
The special size of the hex bolt are able to supplied with customers' special demand.