Hex Head style, supply with full sizes in metric mm or inch sizes, Zinc plated, HDG, dacromet coating, made by the high class medium carbon steel and the heat treatment, designed to fix and anchor the fixture objects in concrete, brick or cavity wall substrate.
Concrete base structure has become one of the main materials in the construction industry. In order to fix the anchoring objects temporarily or permanently in the indoor and outdoor concrete base, the unique design and excellent performance of the concrete screw anchor can solve this problem.
不用于其它混凝土膨胀螺栓和紧固件,混凝土螺旋锚可以很容易地移除,使孔内没有碎屑,从而使安装不当或者变动时成为一个快速解决办法。双重硬化体和大直径高低双自攻牙纹的特性使这种锚非常适合中高荷载的安装应用。凭借混凝土螺旋锚具有锋利的外牙边缘,可以方便地钻入混凝土中。混凝土螺旋锚是理想的连接点下压组件与基板的产品。
Instead of being used for other concrete expansion bolts and fasteners, the concrete screw anchor can be easily removed so that there is no debris in the hole, which makes improper installation or change a quick solution. The characteristics of double hardening body and large diameter high and low double tapping thread make the anchor very suitable for installation application under medium and high loads. With the help of the sharp edge of the external teeth, the screw anchor can be easily drilled into the concrete. The concrete screw anchor is an ideal product for connecting the pressing components and the base plate.
螺旋锚使用旋转的安装设计来进行高强度加载。紧固件的柔韧性非常适合于靠近边缘或接近锚固件的紧固,因为它不会膨胀和爆裂周围的基板。一个快速安装的可能性同时又能容易从混凝土中移除,混凝土螺旋锚是理想的解决方案。
Concrete screw anchor bolts use a rotating mounting design for high strength loading. The flexibility of the fastener is very suitable for fastening close to the edge or close to the anchor because it does not swell and burst around the substrate. A possibility of quick installation and easy removal from concrete, the concrete screw anchor is the ideal solution.
It has excellent performance and is suitable for the purpose of installation and fixation from wood to concrete and masonry engineering. Many of them are vibration resistant and can be used for cracked or non cracked concrete without pre-set holes. A variety of heads are suitable for different installation and use places. Good surface plating, hot dip galvanized, or Dacromet spray plating have good oxidation resistance, rust prevention and chemical corrosion resistance.
* Drill a hole with a rotary hammer drill.
*有冲击电钻打一个所需深度和孔径的安装导孔。
* Drill an installation pilot hole of required depth and hole diameter with impact drill.
*清除孔内的灰尘和渣土。
* Remove the dust and residue from the hole.
*夹紧固定物体用工具拧紧头部充分钻入孔内。
* Clamp the fixture object, tighten the head with a tool, and fully drill into the hole.
*拧紧混凝土螺旋锚使其头部和固定问题夹紧完成安装。
* Tighten it so that its head and fixing problems are clamped to complete the installation.
*如需移除,反向旋转拧松螺栓头部,直至出孔。
* If to remove, loosen the head by reverse rotation until it comes out of the hole.
Size mm | Dia. mm | Length mm | Drill mm |
6.5 X 30 | 6.5 | 30 | 6.5 |
6.5 X 120 | 6.5 | 120 | 6.5 |
8 X 50 | 8 | 50 | 8 |
8 X 60 | 8 | 60 | 8 |
8 X 75 | 8 | 75 | 8 |
10 X 60 | 10 | 60 | 10 |
10 X 100 | 10 | 100 | 10 |
10 X 150 | 10 | 150 | 10 |
12 X 75 | 12 | 75 | 12 |
12 X 150 | 12 | 150 | 12 |
12 X 300 | 12 | 300 | 12 |
14 X 80 | 14 | 80 | 14 |
14 X 115 | 14 | 115 | 14 |
16 X 90 | 16 | 90 | 16 |
16 X 200 | 16 | 200 | 16 |
16 X 320 | 16 | 320 | 16 |
*The other sizes are available.
*The Metric and Inch thread styles are available.
*The surface treatment could be by zinc plated, HDG, dacromet coating.