Cylinder head style in white or clear in metric and inch size and used to fix the objects in concrete, brick, drywall and to insert the anchor body into the drilled hole and to expand and fasten to hit the steel nail by hammer or turn by screwdriver for installation.
Nylon hammer drive anchor is a pin drive plastic anchor with a expanding anchor plug engineered good quality PA-Nylon materials and a metal nail available in carbon and stainless steel material.The anchor can be used in concrete, block or brick place.The anchor plug is pre-assembled with either a carbon steel or stainless steel nail.This anchor is not recommended for applications overhead.
The round head, cylinder and mushroom head versions are measured from below the head while the flat head version is measured end to end. During installation, to select the proper min. anchor length, diameter and the embedment depth required to obtain the desired load capacity and to add the thickness of the fixture, including any spacers or shims to the embedment depth.
* Made with the polyamide(PA)-Nylon material in white or other color.
* Used to fix the objects in concrete substrate, brick or drywall place.
* To insert the anchor body into the drilled hole and to expand and fasten to hit the steel nail by hammer or turn by screwdriver to install when usage.
* The special style and other color are available as customers' inquiry.
|Item Code|| |
D X L (mm)
|Item Code||Anchor Size D X L (Inch)|
|NM525||5.0 X 25||NM31610||3/16 X 1|
|NM540||5.0 X 40||NM316112||3/16 X 1-1/2|
|NM6525||6.5 X 25||NM1410||1/4 X 1|
|NM6540||6.5 X 40||NM14112||1/4 X 1-1/2|
|NM6550||6.5 X 50||NM1420||1/4 X 2|
|NM6575||6.5 X 75||NM1430||1/4 X 3|