Pin plugs for cable clips are the special pin plugs are made from high class impaction polyethylene plastic material with UV proof, environmental protection complying with RoHS certifcate. It is designed a expanding plug with a hole in the center of plug.Used to fix the pin of cable clip or similar small steel nail into very hard masonry concrete substrate,ceramic tile on the wall or the very light block or soft wall substrates when using the cable clips to install the cable wire.
The existing size is φ5 mm X 18 mm Length in grey. Just to drill a 5.0 mm hole in the wall and the proper embedment depth and to insert the pin plug into the hole and tap it fully. Hammer the steel pin of the cable clip into a small hole in the centre of the plastic plug. This greatly increases the friction of the steel nail of cable clip when being fixed. That can make cable clip more firmly installed on the wall to avoid falling off and loosening during the installation
When they are installed in the medium hardness substrates, drill a 5.0 mm hole and continue as above with hard materials. In very soft wall substrates, To hammer the nail plug directly into the substrate without drilling a hole.