The screws of the anchor have been manufactured under standaard and their quality-hardness is 6.8 (i. e. 60 to 80 Kgf/mm).
The washer is wide, which gives a bigger allowance for pleces or structures to be fastened.
While performing the fixing of the anchor, the plastic ring gets deformed. which fills and blocks the hole of the plece ofr structure to be fastened; this plastics absorbs material irregularities, and-in addition-it is a useful damp-proof plece to inner mechanism of the anchor.
Any screw head available as your requirement.
The cone has some grooves(milled)in order to prevent the anchor from loose or spin movement after fixing into the hole and ready to expansion.
* Any screw size is available as your requirement.The Flat Washer have DIN 125 Or DIN 9021 for customers' choose
* The Hex Nut is as DIN 934 standard
* The special size of the screw/bolt can be supplied as customers' needings.
While performing the fixing of the anchor, the plastic ring gets deformed. which fills and blocks the hole of the place of structure to be fastened; this plastics absorbs material irregularities, and-in addition-it is a useful damp-proof place to inner mechanism of the anchor.
While performing the fixing of the anchor, the plastic ring gets deformed. which fills and blocks the hole of the place of structure to be fastened; this plastics absorbs material irregularities, and-in addition-it is a useful damp-proof place to inner mechanism of the anchor.
Sleeve Anchor With Flange Nut Preassembled for quick and easy installation, used in thin sections of concrete or solid masonry, etc. To tight the flange nut with tools to expand the anchor body in the drilled hole to install to fix the objects.
Sleeve Anchor With hook bolt to tight with the hex nut or the hookbolt head by tools to expand the anchor body to complete the installation for usage in concrete or masonry place and structure.
Sleeve Anchor With Eyebolt to tight with the hex nut or the eyebolt head by tools to expand the anchor body to complete the installation for usage in concrete or masonry place and structure.
The sleeve tube stamped holes.Any bolt in Inch or Metric size is available as your requirement. The Flat Washer have DIN 125 Or DIN 9021 for customers' choose. To expand when fastening the hex nut to install for usage.
Sleeve Anchor With Hex Nut and Washer Preassembled for quick and easy installation, used in thin sections of concrete or solid masonry, etc. To tight the flange nut with tools to expand the anchor body in the drilled hole to install to fix the objects.
The sleeve tube with nine holes.Any screw size is available as your requirement. The Flat Washer have DIN 125 Or DIN 9021 for customers' choose. To expand when fastening the hex nut to install for usage.
The part of sleeve is made by welded steel tube or non-welded steel tube, consisted of T bolt, washer and hex nut. Any T bolt size is available as your requirement. The Flat Washer have Din 125 Or Din 9021 for customers' choose. To expand and install to tighten the hex nut when usage.
While performing the fixing of the anchor, the plastic ring gets deformed. which fills and blocks the hole of the place of structure to be fastened; this plastics absorbs material irregularities, and-in addition-it is a useful damp-proof place to inner mechanism of the anchor.
We can make the new products according to the samples & sketches provided.Most of our products are exported abroad for good quality, competitive price and super-service.
