Produced with the American Inch threads standard from diameter 1/4" to 3/4" X Length and Stamped a English letter on anchor head to show the anchor length size. The special size and style are available according to sketch and sample.
Wedge Anchor inch-unc threads standard can be hammered below the surface of the concrete substrate when no longer needed and made of carbon steel or stainless steel as the metric wedge anchors and inch thread wedge anchors standard from diameter M6 -1/4" to M24-1" for the special size and the style are available according to sketch and sample. The surface of the wedge anchor could be plated by white zinc plate, yellow zinc plated, HDG or Dacromet as the customers' request.
The expanding clip is formed around anchor, assuring full expansion for dependable, superior holding power. The expanding clip will not fall off twist in the hole. They are used in the concrete or masonry place,construction building site to fix and fasten the objects safely and widely.
Manufacturer of standard and custom-made concrete wedge anchors, mainly for the application of anchoring objects in concrete base mechanism, can be used in horizontal or vertical configuration, suitable for medium to heavy load objects.
楔形锚栓是一种扭矩控制的楔形膨胀锚,适用于需要混凝土中高拔出值的重型紧固件应用。碳钢和不锈钢是这类锥形锚的主要制作材料,抱裹在无外牙纹的锥形端上的CLIP主要起膨胀的功能。锚和孔径相同,通过将锚穿过待紧固材料中的现有孔来简化锚的安装。用于将钢铁或者其它金属材料的物体固定到混凝土基层上。由于其对振动荷载的高阻力。
Wedge anchor bolt is a kind of wedge expansion anchor with torque control, which is suitable for heavy fastener application requiring high pull-out value in concrete. Carbon steel and stainless steel are the main materials of wedge anchors. The expanding clip wrapped on the conical end without external thread pattern mainly plays the function of expansion. The anchor is the same as the hole diameter, and the installation of the anchor is simplified by passing the anchor through the existing hole in the material to be fastened. It is used to anchor and fix objects of steel or other metal materials to concrete base. Due to its high resistance to vibration loads.
楔形锚栓的安装操作简单快速,螺栓可以通过需要固定物体中的预钻孔进入混凝土孔中。一旦螺母和垫圈被拧紧,负载就被固定住,使物体紧贴孔表面。同时也被称为贯穿螺栓。
The installation of wedge anchor bolt is simple and fast, and the bolt can enter the concrete hole through the pre drilled hole in the fixed object. Once the nut and washer are tightened, the load is held against the surface of the hole. Also known as through bolts.
混凝土楔形锚用于将固定装置固定在混凝土中。混凝土楔形锚通过将其插入混凝土钻孔中而起作用。然后将混凝土楔形锚定器膨胀,将其牢固地楔入混凝土中。
Concrete wedge anchors are used to hold fixtures in concrete. The concrete wedge anchor works by inserting it into a concrete drill hole. The wedge anchor is then expanded and wedged firmly into the concrete.Multi unctional construction solutions for anchoring various installation projects.The unique design is also suitable for installation in earthquake areas.
•应用于混凝土和灌浆填充的砌块基层
* Block base for concrete and grout filling.
•不锈钢材料和良好的碳钢表面电镀可以耐盐水、淡水、雨水或海洋应用
* Stainless steel materials and good carbon steel surface plating are resistant to salt water, fresh water, rain or marine applications.
•用于将设备和物体固定在基层表面
* Used to fix equipment and objects on the base surface.
•安装前必须预钻导孔,放入在预钻孔中
* Pilot hole must be pre drilled and put into the pre drilling before installation.
•无螺纹端插入孔中,然后敲击头部
* The unthreaded end is inserted into the hole and the head is tapped. Next, press the nut against the washer and tighten the nut to the mounting with a tool.
Item Code | Anchor size (mm) | Item Code | Anchor size (Inch) | |
WAM-06040 | M6x40 | WA-14134 | 1/4x1-3/4 | |
WAM-06055 | M6x55 | WA-14214 | 1/4x2-1/4 | |
WAM-06070 | M6x70 | WA-14300 | 1/4x3 | |
WAM-06095 | M6x95 | WA-38214 | 3/8x2-1/4 | |
WAM-08050 | M8x50 | WA-38234 | 3/8x2-3/4 | |
WAM-08065 | M8x65 | WA-38300 | 3/8x3 | |
WAM-08080 | M8x80 | WA-38334 | 3/8x3-3/4 | |
WAM-08095 | M8x95 | WA-38500 | 3/8x5 | |
WAM-080105 | M8x105 | WA-12234 | 1/2x2-3/4 | |
WAM-080120 | M8x120 | WA-12334 | 1/2x3-3/4 | |
WAM-080165 | M8x165 | WA-12414 | 1/2x4-1/4 | |
WAM-080220 | M8x220 | WA-12512 | 1/2x5-1/2 | |
WAM-10065 | M10x65 | WA-12700 | 1/2x7 | |
WAM-10080 | M10x80 | WA-58312 | 5/8x3-1/2 | |
WAM-10095 | M10x95 | WA-58500 | 5/8x5 | |
WAM-10115 | M10x115 | WA-58600 | 5/8x6 | |
WAM-10120 | M10x120 | WA-58700 | 5/8x7 | |
WAM-10130 | M10x130 | WA-58812 | 5/8x8-1/2 | |
WAM-12080 | M12x80 | WA-34400 | 3/4x4 | |
WAM-12100 | M12x100 | WA-34500 | 3/4x5 | |
WAM-12120 | M12x120 | WA-34700 | 3/4x7 | |
WAM-12080 | M12x80 | WA-34812 | 3/4x8-1/2 | |
WAM-12100 | M12x100 | WA-34100 | 3/4x10 | |
WAM-12120 | M12x120 | WA-78600 | 7/8x6 | |
WAM-12135 | M12x135 | WA-78800 | 7/8x8 | |
WAM-12150 | M12x150 | WA-78100 | 7/8x10 | |
WAM-16105 | M16x105 | WA-16000 | 1x6 | |
WAM-16140 | M16x140 | WA-19000 | 1x9 | |
WAM-16180 | M16x180 | WA-11200 | 1x12 | |
WAM-20125 | M20x125 | |||
WAM-20160 | M20x160 | |||
WAM-20200 | M20x200 | |||
WAM-20300 | M20x300 |