Wedge Anchor is produced by SS 304 or SS 316 materials having stronger tensile strength than produced by the carbon steel materials. The clip is formed around anchor,assuring full expansion for dependable,superior holding power. Expanding clip will not fall off twisting in the hole.
Stainless steel wedge anchors are made of high-quality stainless steel material SS304 and SS 316 and has excellent corrosion resistance. It is designed to be used in places with high environmental requirements. They are used to anchor and secure materials and equipment to the surface of a solid concrete masonry base.
不锈钢锚具由一个螺母,一个平垫,一个膨胀CLIP和锚具体组成。锚具杆体上端被搓外牙,下端被车削成锥形并有被一片膨胀CLIP用冲床冲压包裹。这些配件也全部都由不锈钢材料制成。这样的设计使得混凝土楔形锚栓在底部附近有一个机制,在安装过程中,产品放入预钻孔后,用工具拧紧螺母的时候,CLIP就会在锥形杆体的下端向上移动,它就会膨胀并“楔入”混凝土中,和洞内壁产生强烈的摩擦力和实现膨胀功能,达到锚固和安装物体的使用目的。
The stainless steel wedge anchor bolts consist of a nut, a flat washer, an expansion clip and an anchor boday. The upper end of the anchor rod body is rubbed with external threads, and the lower end is turned into a cone, which is pressed and wrapped by a piece of expanded clip. These accessories are all made of stainless steel. This design makes the concrete wedge anchor bolt have a mechanism near the bottom. During the installation process, when the product is put into the pre drilled hole and the nut is tightened with a tool, clip will move upward at the lower end of the tapered rod body, and it will expand and "wedge" into the concrete, and produce strong friction with the inner wall of the hole and realize the expansion function, so as to achieve the purpose of anchoring and installing objects.
使用前,根据产品外径,必须预先钻一个安装导孔。将无螺纹端嵌入孔中,然后敲击以激活膨胀机构,当螺母在紧固材料表面外侧的垫圈上拧紧时,膨胀机构将得到充分利用。大多数楔形锚仍然嵌入固定的混凝土实心砌体材料中。
Before use, a guide hole must be drilled in advance according to the outer diameter of the product. The unthreaded end is inserted into the hole and tapped to activate the expansion mechanism, which will be fully utilized when the nut is tightened on the washer on the outside of the fastening material surface. The most wedge anchors are still embedded in the fixed concrete solid masonry material.
不锈钢锚具的规格尺寸和碳钢锚具一样。但是,由于不锈钢材料的机械和化学性能要优于碳钢,这样使得,不锈钢锚具由更强的膨胀和紧固强度,以及更优的防腐防锈功能。
The size of SS wedge anchors are the same as that of steel wedge anchor. However, due to the mechanical and chemical properties of stainless steel material are better than that of carbon steel, stainless steel wedge anchor has stronger expansion and tightening strength, and better corrosion and rust prevention function.
* Could be hammered below the surface of the concrete when no longer needed for usage.
* The stainless steel expanding clip is formed around anchor body,assuring full expansion for dependable,superior holding power and expanding clip will not fall of twisting in the hole.
* Belongs to stainless steel expansion anchors
* Available made of carbon steel and stainless steel and special style according to sketch and sample.
* The testing certificate can be supplied.
Item Code | Anchor size (mm) | Item Code | Anchor size (Inch) | |
WAM-06040 | M6x40 | WA-14134 | 1/4x1-3/4 | |
WAM-06055 | M6x55 | WA-14214 | 1/4x2-1/4 | |
WAM-06070 | M6x70 | WA-14300 | 1/4x3 | |
WAM-06095 | M6x95 | WA-38214 | 3/8x2-1/4 | |
WAM-08050 | M8x50 | WA-38234 | 3/8x2-3/4 | |
WAM-08065 | M8x65 | WA-38300 | 3/8x3 | |
WAM-08080 | M8x80 | WA-38334 | 3/8x3-3/4 | |
WAM-08095 | M8x95 | WA-38500 | 3/8x5 | |
WAM-080105 | M8x105 | WA-12234 | 1/2x2-3/4 | |
WAM-080120 | M8x120 | WA-12334 | 1/2x3-3/4 | |
WAM-080165 | M8x165 | WA-12414 | 1/2x4-1/4 | |
WAM-080220 | M8x220 | WA-12512 | 1/2x5-1/2 | |
WAM-10065 | M10x65 | WA-12700 | 1/2x7 | |
WAM-10080 | M10x80 | WA-58312 | 5/8x3-1/2 | |
WAM-10095 | M10x95 | WA-58500 | 5/8x5 | |
WAM-10115 | M10x115 | WA-58600 | 5/8x6 | |
WAM-10120 | M10x120 | WA-58700 | 5/8x7 | |
WAM-10130 | M10x130 | WA-58812 | 5/8x8-1/2 | |
WAM-12080 | M12x80 | WA-34400 | 3/4x4 | |
WAM-12100 | M12x100 | WA-34500 | 3/4x5 | |
WAM-12120 | M12x120 | WA-34700 | 3/4x7 | |
WAM-12080 | M12x80 | WA-34812 | 3/4x8-1/2 | |
WAM-12100 | M12x100 | WA-34100 | 3/4x10 | |
WAM-12120 | M12x120 | WA-78600 | 7/8x6 | |
WAM-12135 | M12x135 | WA-78800 | 7/8x8 | |
WAM-12150 | M12x150 | WA-78100 | 7/8x10 | |
WAM-16105 | M16x105 | WA-16000 | 1x6 | |
WAM-16140 | M16x140 | WA-19000 | 1x9 | |
WAM-16180 | M16x180 | WA-11200 | 1x12 | |
WAM-20125 | M20x125 | |||
WAM-20160 | M20x160 | |||
WAM-20200 | M20x200 | |||
WAM-20300 | M20x300 |