Also called zamac hammer drive anchor,designed mushroom head style, made of zamac alloy material, Pre-assembled a steel nail used to install the fixture objects in masonry, concrete, brick or drywall, providing the full inch and metric mm dimensions.
The use of zamac hammer drive anchor can realize a fast, strong and permanent role in the installation and fixation. It is an ideal anchorage product for concrete block or brick wall material base structure. The expansion body is made of rust proof high-grade zamac alloy, pre-assembled with a steel nail and mushroom head with tamper proof and vibration proof. They can transfer the expansion force to the installation base. In order to ensure the safety and firmness of the anchorage, reasonable installation spacing is required in the place where multiple anchors need to be placed.
在安装之前,用和膨胀体外径相同的硬质合金钻头在基材上钻一个安装导孔。将孔钻至规定的埋置深度,放置固定物体并将钉子插入锚定装置。用锤子敲打,直到与夹具平齐,然后敲打销,直到与顶部齐平。锤击式锚具是轻型、防篡改、预装配的钉击式锚,用于混凝土、砌块、砖块和石头中的永久安装。锚具有耐腐蚀锌合金主体和镀锌或不锈钢钉。安装时,钻一个与锚相同直径(3/16“或1/4”)且至少比埋置深度深1/4“的孔,将孔吹干净,并将锚穿过夹具插入孔中。将钉子与头部齐平,使身体膨胀,并将锚固定到位。从蘑菇头下面测量长度。不要将锤击式锚具用于高空作业。驱动锚在混凝土、砌块、砖块和石头中提供安全的支撑。
Before installation, drill a guide hole on the base material with a carbide drill bit of the same external diameter as the expansion. Drill the hole to the specified embedment depth, place the fixed object and insert the nail into the anchoring device. Tap with a hammer until it is flush with the fixture, then tap the pin until it is flush with the top. hammer type anchorage is a light, tamper proof, preassembled hammer type anchor, which is used for permanent installation in concrete, block, brick and stone. The anchor body has a corrosion-resistant zamac alloy body and galvanized or stainless steel nails. During installation, drill a hole of the same diameter (3/16"or 1/4") as the anchor and at least 1/4"deeper than the embedment depth, blow out the hole, and insert the anchor through the fixture into the hole. Level the nail with the head, inflate the body, and hold the anchor in place. Measure the length from under the mushroom head. Do not use hammering anchors for aerial work. Zamac drive anchors provide safe support in concrete, block, brick substrate.
1.需要预先钻一个安装孔。
1. A mounting hole needs to be drilled in advance.
2.适用于安装支架、干墙轨道,门窗支架结构或者电气箱。
2. Suitable for mounting bracket, dry wall track, door and window bracket structure or electrical box.
3.锌合金材质,耐腐蚀。
3. Zinc alloy material, corrosion resistance.
4.用锤子敲入,使安装材料膨胀并夹紧。
4. Tap in with a hammer to expand and clamp the mounting material.
5.安装锚时,蘑菇头位于材料表面上方。
5. When installing the anchor, the mushroom head is above the material surface.
Anchor Size Inch/mm | Length Inch/mm | Drill Dia. Inch/mm |
3/16 X 7/8 | 7/8 | 3/16 |
1/4 X 3/4 | 3/4 | 1/4 |
1/4 X 1 | 1 | 1/4 |
1/4 X 1-1/4 | 1-1/4 | 1/4 |
1/4 X 1-1/2 | 1-1/2 | 1/4 |
1/4 X 2 | 2 | 1/4 |
1/4 X 2-1/2 | 2-1/2 | 1/4 |
1/4 X 3 | 3 | 1/4 |
M5 X 22 | 22 | 5 |
M6 X 30 | 30 | 6 |
M6 X 40 | 40 | 6 |
M6 X 50 | 50 | 6 |
M6 X 65 | 65 | 6 |
***The special styles and sizes are available.
***The stainless steel nails are also available.